|
The Atlas Oryx (named after the Oryx antelope) is a medium-sized utility helicopter manufactured by the Atlas Aircraft Corporation (now Denel Aviation) of South Africa. ==Design and development== Outside France, the SAAF was the largest user of Aérospatiale SA 330 Puma. The Oryx can trace its origins back to the Bush War. Despite the efforts of the gunship Alouette, the need for a dedicated gunship was recognized. Atlas Aircraft Corporation produced an experimental attack helicopter, the Alpha XH-1. This helicopter was used for feasibility studies and could not serve any practical purpose - this led to the more powerful XTP-1 in April 1987. Two XTP-1s were converted, and based on a Puma J airframe. Various weapons and other systems were tested on XTP-1 and paved the way for Project: Denel Rooivalk. However, the dynamic flight components of the XTP-1 made Atlas realise what advantages an upgraded Puma could have. A 330L Puma, no. 177, was converted to Oryx configuration and used as a prototype and as the results exceeded all expectations the Oryx programme was launched. The sanctions era encouraged the local aviation industry to become self-sufficient in producing helicopter components and, with the knowledge to assemble pre-manufactured helicopters, led to the technical skill for producing complete Puma helicopters, should the need arise. This included complete airframes and dynamic components such as gearboxes, rotor blades and turbines and hot section parts. The engine intakes are fitted with locally produced dust filters and ensure higher efficiency and reliability. It is an upgraded and remanufactured version of the Aérospatiale Puma, equivalent to the Eurocopter Super Puma, and offers a performance improvement over the original, in addition to cutting the operating costs by 25 to 30%. First examples were fitted with the latest dust filters as were then in use on the SAAF Puma. These units had a moveable auxiliary air intake on the front. A newly designed dust filter was later fitted without the auxiliary air intake. Should one of the engines fail, the remaining powerplant has sufficient power for the Oryx to complete its mission. If an engine fails in flight, the management system automatically advances the power setting on the remaining engine. This ensures the Oryx sustains flight with very little crew input, during such an emergency. The basic airframe is still that of the original Puma, but the structure was modernized by extensive use of locally produced carbon-composite materials. These materials result in an airframe that is lighter and more rugged, which increases the Oryx's endurance and maneuverability. The obvious external difference is the new modified tailboom which is slightly longer (50 cm), than the Puma. By mid-1991, the SAAF acknowledged that the Oryx was in service, as a replacement for the Puma and Super Frelon. It was shown for the first time to the public at an open day at Potchefstroom in August '91. The Oryx is currently in service with several squadrons of the South African Air Force, with about 35 being in service. The Oryx is a multi-role helicopter. Its main uses in the SAAF are: medium to heavy transport and communications flights, task force rapid deployment operations, fire fighting, and search & rescue missions. It can carry up to 20 fully equipped troops, or 6 wounded on stretchers with 4 attendants, or 3,000 kg freight carried in the cabin, or 4,500 kg freight on an external sling. Tasks for the SA Navy include transport, replenishment at sea, force multiplication, reconnaissance, search & rescue, etc. Most Oryx are equipped with a 50m hydraulic hoist, rated for up to 2 personnel, for use in rescue operations. Additionally a large metal A-frame structure can be fitted in the cargo bay which allows up to 4 personnel to rappel or abseil from the aircraft simultaneously. Oryx operating from coastal squadrons are fitted with emergency flotation gear on the sponsons and nose. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Atlas Oryx」の詳細全文を読む スポンサード リンク
|